리퍼비시 IT장비

리퍼비시 IT장비

WS-SUP32-GE-3B

  • ModelWS-SUP32-GE-3B
  • MakerCISCO
  • DescriptionThe Cisco ® Catalyst ® 6500 Series/Cisco 7600 Series Supervisor Engine 32 delivers industry-leading security, availability, and manageability services for the networks of small and medium-sized business, enterprises, and service providers. This supervisor engine is ideal for applications requiring maximum uptime and security for small and medium-sized LAN core functions, distribution, and access as well as enterprise LAN/WAN access and service provider edge applications. The Supervisor Engine 32 provides investment protection for current Cisco Catalyst 6500 Series and Cisco 7600 Series deployments by supporting all existing classic and Cisco Express Forwarding 256-based modules and enabling new applications.
  • Option기본
  • Rental문의요망
  • Stock재고있음
Data Sheet

 Features and Benefits of Supervisor Engine 32

 

Features

Benefits

Identity-based networking services with IEEE 802.1x:

• VLAN ID assignment

• Security ACL assignment

• QoS policy assignment

• Unidirectional controlled port for “wake-on-LAN” applications

• Authentication identity-to-port description mapping

• Domain Name System (DNS) resolution for RADIUS server configuration

Allows close control over which users can access the network and what privileges they are granted

Intrusion detection and spoofing protection mechanisms:

• DHCP snooping, dynamic ARP inspection, IP source guard-Cisco Catalyst 6500 Security Toolkit

• CPU rate limiting

• Control Plane Policing

• Port-based ACLs

• User-based rate limiting

• Hardware-based MAC learning

• Cisco Catalyst 6500 IDS module

• Broadcast and multicast suppression

• Port Security on Access, 802.1Q Trunks and 802.1Q Tunneling ports

Provides local containment of security threats and protects networks against security vulnerabilities, including malicious and inadvertent intrusion

Hot-Swapping of Standby Supervisor Engines

• Layer 2 rapid convergence protocol suite includes:

· IEEE 802.1s, multiple spanning trees

· IEEE 802.1w, rapid reconfiguration of spanning tree

· Per-VLAN rapid spanning tree (PVRST)

• Hardware redundancy with subsecond stateful failover and Layer 2 resiliency through 802.1x high availability

• Fault management:

· Fault detection and troubleshooting

· System health check

· Enhanced memory protection

· Proactive detection and prevention of network equipment failures using GOLD

Ensures business continuity through minimizing network downtime for mission-critical applications

Switched Port Analyzer (SPAN), Remote SPAN (RSPAN)

Enables remote troubleshooting from anywhere, reducing troubleshooting time and tool costs

Two USB 2.0 ports (hardware ready, software support post-first customer shipment [FCS])

Enables direct access from laptops for network management, simplifies software downloading using USB memory devices, and enhances security by enabling USB keys on console port to limit access to authorized personnel

ACE counters

Identifies frequency that specific ACL entries are hit for ease of management

Cisco SmartPort macros, config rollback, and switch profiles

Simplifies operational complexity

SNMPv3, SSH Protocol Version 2, Secure Copy Protocol (SCP)

Provides secure management

Multicast capabilities:

• Hardware-based multicast

• Bidirectional Protocol Independent Multicast (PIM)

• Internet Group Management Protocol (IGMP) Querier

• Router-port Group Management Protocol (RGMP), Multiprotocol Border Gateway Protocol (MBGP)

• PIM SM, PIM SSM and PIM snooping

• IGMP version 3

Enables efficient video broadcasting, e-learning, and information sharing

Integrated high-density uplinks-eight Gigabit Ethernet SFP-based ports or two 10-Gigabit Ethernet XENPAK-based ports

Increases uplink density and saves slots to deploy integrated service modules or higher-density chassis

Backward compatibility-supports all Cisco Catalyst 6500 classic and Cisco Express Forwarding 256-based modules and services modules; supported in all Cisco Catalyst 6500 Series and Cisco 7600 Series Router chassis

Allows deployment of new advanced services on existing equipment, prolonging the deployment lifetime of interface modules and providing greater return on investment

• Advanced QoS uses packet classification and marking and congestion avoidance based on Layer 2-4 header information

• User-based rate limiting enforces any of 64 policy rates, maintaining service-level agreements on a per-user basis independent of traffic type or IP address

• QoS scheduling rules with thresholds can be configured in the switch for multiple receive and transmit queues

Superior traffic management enables efficient handling of converged networks that carry a mix of mission-critical, time-sensitive, and bandwidth-intensive multimedia applications

• Hardware-enabled MPLS-Enables use of VPNs and Layer 2 tunneling while improving traffic engineering for QoS and adding multiprotocol support

• Hardware-enabled IPv6-Expands available IP addresses, enabling better address allocation and address aggregation and supporting greater end-to-end connectivity and services

• Hardware-enabled GRE tunnels for IP traffic

• NAT (hardware ready, software support post-FCS)-Translates addresses for inbound and outbound traffic in hardware, allowing clean separation between internal and external networks

Advanced Layer 2-4 forwarding enables service providers and enterprises to build feature-rich networks

Cisco Catalyst 6500 Series/Cisco 7600 Series Supervisor Engines Feature Comparison

 

Feature

Supervisor Engine 720

Supervisor Engine 32

Supervisor Engine 2

Supervisor Engine 1A (Cisco Catalyst 6500 Series only)

EOS-3/25/2005

Uplinks

Two Gigabit Ethernet ports-one gigabit interface converter (GBIC) based and one configurable to GBIC based or 10/100/1000 RJ-45 based

• Eight Gigabit Ethernet ports, SFP based + one 10/100/1000 RJ-45 port

OR

• Two 10 Gigabit Ethernet ports, XENPAK based + one 10/100/1000 RJ-45 port

Two Gigabit Ethernet ports, GBIC based

Two Gigabit Ethernet ports, GBIC based

Uplink Queue Structure

• Tx 1p2q2t

• Rx 1p1q4t

• 512 KB buffer per port

• Tx 1p3q8t

• Rx 2q8t

• 9.5 MB buffer per Gigabit Ethernet port

• 100 MB buffer per 10 Gigabit Ethernet port

• Tx 1p2q2t

• Rx 1p1q4t

• 512 KB buffer per port

• Tx 1p2q2t

• Rx 1p1q4t

• 512 KB buffer per port

Uplink Port Scheduler

WRR

DWRR or SRR

WRR

WRR

USB Port

No

Two USB 2.0 ports-one host port and one device port

No

No

Self-Power Cycling

No, power cycle line cards only

Yes, power cycle remotely through console port

No, power cycle line cards only

No, power cycle line cards only

Backplane

720 Gbps integrated switch fabric module (SFM)

32 Gbps shared bus

32 Gbps shared bus or 256 Gbps with SFM

32 Gbps shared bus

Performance

Up to 400 Mpps for Cisco Express Forwarding interface modules

Up to 15 Mpps IPv4 services

• 15 Mpps without SFM

• 30 Mpps with SFM and no distributed forwarding cards (DFCs)

• Up to 210 Mpps with SFM and DFCs

15 Mpps

Cisco Express Forwarding

Yes

Yes, hardware-based forwarding with MSFC2A

Yes, hardware-based forwarding with MSFC2

No, flow-based forwarding

Distributed Cisco Express Forwarding

Yes, with a DFC3 present

No

Yes, with a DFC present

No

SP NVRAM

2 MB (SP)

2 MB (SP)

512 KB (SP)

512 KB (SP)

SP Dynamic RAM (DRAM)

512 MB default, upgradeable to 1 GB on Supervisor Engine 720 and Supervisor Engine 720-3B; 1 GB default on Supervisor Engine 720-3BXL

512 MB default, upgradeable to 1 GB

256 MB default, upgradeable to 512 MB

128 MB default

SP Onboard Flash (BootFlash)

64 MB upgradeable to 512 MB, 1GB

256 MB, through internal compact flash (referred to as bootdisk in command-line interface), upgradeable to 512 MB, 1 GB

32 MB

16 MB

Removable Memory

Compact flash type II-64, 128, and 256 MB; hardware capable to support 512 MB, 1 GB

Compact flash type II-64, 128, and 256 MB; hardware capable to support 512 MB, 1 GB; USB

PCMCIA 16, 24, and 64 MB; ATA 64 MB

PCMCIA 16, 24, and 64 MB; ATA 64 MB

Chassis Supported

All Cisco Catalyst 6500 Series chassis and Cisco 7600 Series chassis with fan tray 2 or E-Series fan tray and 2500W power supplies or above

All Cisco Catalyst 6500 Series chassis with fan tray 2 or E-Series fan tray and 2500W power supplies or above; Cisco 7604, Cisco 7606, Cisco 7609, and Cisco 7613 with high speed fan tray

All Cisco Catalyst 6000 Series chassis, Cisco Catalyst 6500 Series chassis, and Cisco 7600 Series chassis with any fan tray

All Cisco Catalyst 6000 Series chassis, Cisco Catalyst 6500 Series chassis, and Cisco 7600 Series chassis with any fan tray

Minimum Software Support

• Cisco Catalyst 6500 Series:

· CatOS 8.1(1)

· Cisco IOS ® Software 12.2(14)SX

• Cisco 7600 Series: Future

• Cisco Catalyst 6500 Series:

· CatOS 8.4(1)

· Cisco IOS 12.2(18)SXF

• Cisco 7600 Series: IOS 12.2.18SXF

• Cisco Catalyst 6500 Series:

· CatOS 6.1

· Cisco IOS 12.1(8a)E

• Cisco 7600 Series: IOS 12.1E, 12.2.SX

• Cisco Catalyst 6500 Series:

· CatOS 5.3

· Cisco IOS 12.0(7)XE1

• Cisco 7600 Series: Not supported

Slot Requirements

Slots 1 and 2 in a 3-slot chassis, slots 5 and 6 in a 6- or 9-slot chassis, and slots 7 and 8 in a 13-slot chassis

Slots 1 and 2 in a 3-slot and 4 slot chassis, slots 5 and 6 in a 6- or 9-slot chassis, and slots 7 and 8 in a 13-slot chassis

Slots 1 and 2 in all chassis

Slots 1 and 2 in all chassis

Hardware-Based Forwarding Engine

PFC3A, PFC3B, or PFC3BXL onboard

PFC3B onboard

PFC2 onboard; not field-upgradeable

Two versions: with and without PFC onboard; not field-upgradeable

MSFC Daughter Card Version

MSFC3 ONBOARD

MSFC2A onboard; Layer 3 support with layer 3 license

MSFC2 optional

MSFC2 optional; not field upgradeable

    회사명

    부서명

    구매문의판매문의렌탈문의수리문의교정문의

    전화상담방문상담견적서상담

    문의 및 요청내용 *

    개인정보 수집, 이용 및 처리방침

    - 수집항목: 이름, 연락처, 이메일, 주소
    - 수집/이용목적: 견적요청에 대한 접수 및 결과 회신
    - 이용기간: 원칙적으로 개인정보 수집 및 이용목적이 달성된 후에는 해당 정보를 지체 없이 파기합니다.
    단, 관계법령의 규정에 의하여 보전할 필요가 있는 경우 일정기간 동안 개인정보를 보관할 수 있습니다.

    그 밖의 사항은 (주)누비콤 개인정보취급방침을 준수하며 견적서를 요청하면 개인정보처리방침에 동의하는 것으로 간주됩니다.

    • 개인정보처리방침에 동의합니다.